Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Install Red Hat Storage Server on both physical and virtual systems and work with existing Red Hat Storage Server appliances Configure a Red Hat Storage Server storage pool Create individual storage bricks on either physical devices or logical volumes Create various Red Hat Storage Server volumes such as: Distributed Replicated Distributed-replicated Stripe-replicated Distributed-striped Distributed-striped-replicated • Format the volumes with an appropriate file system Create Red Hat Storage Server volume snapshots Extend existing storage volumes by adding additional bricks and performing appropriate rebalancing operations * The following audiences may be interested in earning the Red Hat Certificate of Expertise in Hybrid Cloud Storage: System administrators, architects, and others who need to demonstrate their skills, knowledge, and ability in using Red Hat Storage Server RHCEs interested in pursuing Red Hat Certified Architect (RHCA) Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Install Red Hat Storage Server on both physical and virtual systems and work with existing Red Hat Storage Server appliances Configure a Red Hat Storage Server storage pool Create individual storage bricks on either physical devices or logical volumes Create various Red Hat Storage Server volumes such as: Distributed Replicated Distributed-replicated Stripe-replicated Distributed-striped Distributed-striped-replicated • Format the volumes with an appropriate file system Create Red Hat Storage Server volume snapshots Extend existing storage volumes by adding additional bricks and performing appropriate rebalancing operations Configure clients to use Red Hat Storage Server appliance volumes using native and network file systems (NFS) Configure clients to use Red Hat Storage Server appliance volumes using SMB Configure Red Hat Storage Server features including disk quotas and POSIX access control lists (ACLs) Configure IP failover for NFS-and SMB-based cluster services Configure geo-replication services Configure unified object storage Configure Red Hat Storage Server to support Hadoop Troubleshoot Red Hat Storage Server problems Monitor Red Hat Storage Server workloads Perform Red Hat Storage Server management tasks such as tuning volume options, volume migration, stopping and deleting volumes, and configuring server-side quorum As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Exam candidates should: Be a Red Hat Certified System Administrator (RHCSA) or have comparable work experience and skills. Have taken the Red Hat Gluster Storage Administration (RH236) course or have work experience using Red Hat Gluster Storage. Recommended course RH236 - R ...

Study points for the exam To help you prepare, review the exam objectives which highlights the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates for the Red Hat Certificate of Expertise in Server Hardening should be able to perform the following tasks: Identify Red Hat Common Vulnerabilities and Exposures (CVEs) and Red Hat Security Advisories (RHSAs) and selectively update systems based on this information Verify package security and validity Identify and employ standards-based practices for configuring file system security, create and use encrypted file systems, tune file system features, and use specific mount options to restrict access to file system volumes Configure default permissions for users and use special file permissions, attributes, and access control lists (ACLs) to control access to files Install a * The following audiences may be interested in earning the Red Hat Certificate of Expertise in Server Hardening: System administrators responsible for standards-compliant security on Red Hat Enterprise Linux systems System administrators responsible for security on Red Hat Enterprise Linux systems or who wish to harden systems beyond default configurations RHCEs who wish to ea> Red Hat Certified Architect (RHCA). Study points for the exam To help you prepare, review the exam objectives which highlights the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates for the Red Hat Certificate of Expertise in Server Hardening should be able to perform the following tasks: Identify Red Hat Common Vulnerabilities and Exposures (CVEs) and Red Hat Security Advisories (RHSAs) and selectively update systems based on this information Verify package security and validity Identify and employ standards-based practices for configuring file system security, create and use encrypted file systems, tune file system features, and use specific mount options to restrict access to file system volumes Configure default permissions for users and use special file permissions, attributes, and access control lists (ACLs) to control access to files Install and use intrusion detection capabilities in Red Hat Enterprise Linux to monitor critical system files Manage user account security and user password security Manage system login security using pluggable authentication modules (PAM) Configure console security by disabling features that allow systems to be rebooted or powered off using bootloader passwords Configure system-wide acceptable use notifications Install, configure, and manage identity management services and configure identity management clients Configure remote system logging services, configure system logging, and manage system log files using mechanisms such as log rotation and compression Configure system auditing services and review audit reports Use network scanning tools to identify open network service ports and configure and troubleshoot system firewalling As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Be a Red Hat Certified System Administrator (RHCSA) or have comparable wor ...

Kurz je určen pracovníkům, kteří se při výkonu své profese mohou setkat s lidmi, kteří jsou ohroženi, nebo přímo vystaveni domácímu násilí ...

Kurz je určen pracovníkům,kteří se při výkonu své profese mohou setkat s lidmi, kteří jsou ohroženi, nebo přímo vystaveni domácímu násilí. Témata kurzu : Identifikace domácího násilí. Specifika jednání ohrožené osoby a komunikace s ní v případech domácího násilí. Legislativa a služby působící v oblasti domácího násilí. Intervence v případech domácího násilí. ...

Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates for the Red Hat Certificate of Expertise in Enterprise Deployment and Systems Management should be able to perform the following tasks: Configure Red Hat Network (RHN) Satellite server Create child channels of a base channel Create different types of RHN users Create groups and add group administrators Create configuration channels Create a custom RPM spec file and build a binary RPM from provided source code Upload custom RPMS to an RHN Satellite server Create activation keys Assign groups, software channels, and configuration channels to an activation key Configure errata Provision RHN Satellite Server clients using kickstart Set up an SVN version co * System administrators responsible for managing large enterprise environments RHCEs interested in pursuing Red Hat Certified Architect (RHCA) Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates for the Red Hat Certificate of Expertise in Enterprise Deployment and Systems Management should be able to perform the following tasks: Configure Red Hat Network (RHN) Satellite server Create child channels of a base channel Create different types of RHN users Create groups and add group administrators Create configuration channels Create a custom RPM spec file and build a binary RPM from provided source code Upload custom RPMS to an RHN Satellite server Create activation keys Assign groups, software channels, and configuration channels to an activation key Configure errata Provision RHN Satellite Server clients using kickstart Set up an SVN version control repository Kickstart a machine using Cobbler Manage virtual systems using RHN Satellite server Clone channels and use a cloned channel As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Red Hat recommends that candidates ea> Red Hat Certified System Administrator (RHCSA) or Red Hat Certified Engineer (RHCE) before attempting this exam but neither is required. Be Red Hat Certified System Administrators or have comparable work experience and skills (Red Hat Certified Engineer would be even better) Have taken the Red Hat Enterprise Deployment and Systems Management (RH401) course or have extensive work experience working with Red Hat Satellite Server Review the Red Hat Certificate of Expertise in Enterprise Deployment and Systems Management exam (EX401) objectives Recommended courses RH401 - Red Hat Enterprise Deployment and Systems Management ...

Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform these tasks: Install and configure Puppet. Install Puppet servers. Install Puppet nodes. Register Puppet nodes to a Puppet server. Create and maintain Puppet manifests. Create new Puppet manifests. Debug existing Puppet manifests. Create Puppet modules. Create reusable modules. Create modules with classes, name spaces, variables, and conditionals. Create modules that install software on target nodes and deploy configuration files. Use facter to obtain system information. Create custom facts. Use facts to change Puppet behavior. Create Git repositorie * These audiences may be interested in earning the Red Hat Certificate of Expertise in Configuration Management with Puppet: Experienced Linux system administrators responsible for the planning, deployment, and management of multiple physical or virtualized servers Experienced Linux systems administrators responsible for implementing DevOps practices An RHCE interested in earning a Red Hat Certificate of Expertise or Red Hat Certified Architect (RHCA) credential Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform these tasks: Install and configure Puppet. Install Puppet servers. Install Puppet nodes. Register Puppet nodes to a Puppet server. Create and maintain Puppet manifests. Create new Puppet manifests. Debug existing Puppet manifests. Create Puppet modules. Create reusable modules. Create modules with classes, name spaces, variables, and conditionals. Create modules that install software on target nodes and deploy configuration files. Use facter to obtain system information. Create custom facts. Use facts to change Puppet behavior. Create Git repositories. Create and perform simple management of a Git repository. Add files to a Git repository. Apply changes and commit changed files to a Git repository. Implement Puppet in a Red Hat Satellite 6 environment. Create a Puppet repository on Red Hat Satellite. Install, configure, and deploy Puppet modules using Red Hat Satellite. Register Puppet clients to a Red Hat Satellite server. As with all Red Hat performance-based exams, configurations must persist after restart without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as total scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Exam candidates should: Hold a current RHCE certification at exam time Have Red Hat Configuration Management with Puppet (DO405) or equivalent experience Understand that actual system administration experience is also an important aspect of preparation for the exam Review exam objectives for the Red Hat Certificate of Expertise in Configuration Management with Puppet exam Recommended courses DO405 - Configuration Management with Puppet ...

Study points for the exam To help you prepare, review the exam objectives which highlights the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Configure a high-availability cluster, using either physical or virtual systems, that: Provides a service fail-over between the nodes Provides a preferred node for the service Selectively fails over based on node characteristics Manage logical volumes in a clustered environment such as: Create volumes and volume groups that are available to all members of a highly-available cluster Create snapshots of logical volumes Configure a GFS file system to: Meet specified size, layout, and performance objectives Support file system quotas Configure iSCSI targe * Experienced Linux ® system administrators responsible for the planning, deployment, and management of more than 1 physical or virtualized server An RHCE interested in earning a Red Hat Certificate of Expertise or RHCA credential Study points for the exam To help you prepare, review the exam objectives which highlights the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Configure a high-availability cluster, using either physical or virtual systems, that: Provides a service fail-over between the nodes Provides a preferred node for the service Selectively fails over based on node characteristics Manage logical volumes in a clustered environment such as: Create volumes and volume groups that are available to all members of a highly-available cluster Create snapshots of logical volumes Configure a GFS file system to: Meet specified size, layout, and performance objectives Support file system quotas Configure iSCSI targets and initiators Manage device configuration using udev Create and manage Red Hat Storage based clusters including: Creating distributed clusters Creating replicated clusters Implementing and utilizing appropriate file systems As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Holding a current RHCE certification is recommended. Have Red Hat Enterprise Clustering and Storage Management (RH436) or equivalent experience. Understand that real-world system administration experience is also an important aspect of preparation for the exam. Review exam objectives for the Red Hat Certificate of Expertise in Clustering and Storage Management Exam. Recommended courses RH436 - Red Hat High Availability Clustering ...

Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as Performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind C * Experienced Linux system administrators responsible for maximizing resource utilization through performance tuning An RHCE interested in earning Red Hat Certified Architect (RHCA) Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as Performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind Configure systems to run SystemTap scripts Alter process priorities of both new and existing processes Configure systems to support alternate page sizes for applications that use large amounts of memory Given multiple versions of applications that perform the same or similar tasks, choose which version of the application to run on a system based on its observed performance characteristics Configure disk subsystems for optimal performance using mechanisms such as swap partition placement, I - O scheduling algorithm selection, file system layout and others Configure kernel behavior by altering module parameters Calculate network buffer sizes based on known quantities such as bandwidth and round-trip time and set system buffer sizes based on those calculations Select and configure tuned profiles Manage system resource usage using control groups As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Red Hat recommends that candidates ea> Red Hat Certified System Administrator (RHCSA) or Red Hat Certified Engineer (RHCE) before attempting this exam but neither is required. Exam candidates should: Be a Red Hat Certified System Administrator (RHCSA) or have comparable work experience and skills (RHCE would be eve ...

Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Install Red Hat Storage Server on both physical and virtual systems and work with existing Red Hat Storage Server appliances Configure a Red Hat Storage Server storage pool Create individual storage bricks on either physical devices or logical volumes Create various Red Hat Storage Server volumes such as: Distributed Replicated Distributed-replicated Stripe-replicated Distributed-striped Distributed-striped-replicated • Format the volumes with an appropriate file system Create Red Hat Storage Server volume snapshots Extend existing storage volumes by adding additional bricks and performing appropriate rebalancing operations * The following audiences may be interested in earning the Red Hat Certificate of Expertise in Hybrid Cloud Storage: System administrators, architects, and others who need to demonstrate their skills, knowledge, and ability in using Red Hat Storage Server RHCEs interested in pursuing Red Hat Certified Architect (RHCA) Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Install Red Hat Storage Server on both physical and virtual systems and work with existing Red Hat Storage Server appliances Configure a Red Hat Storage Server storage pool Create individual storage bricks on either physical devices or logical volumes Create various Red Hat Storage Server volumes such as: Distributed Replicated Distributed-replicated Stripe-replicated Distributed-striped Distributed-striped-replicated • Format the volumes with an appropriate file system Create Red Hat Storage Server volume snapshots Extend existing storage volumes by adding additional bricks and performing appropriate rebalancing operations Configure clients to use Red Hat Storage Server appliance volumes using native and network file systems (NFS) Configure clients to use Red Hat Storage Server appliance volumes using SMB Configure Red Hat Storage Server features including disk quotas and POSIX access control lists (ACLs) Configure IP failover for NFS-and SMB-based cluster services Configure geo-replication services Configure unified object storage Configure Red Hat Storage Server to support Hadoop Troubleshoot Red Hat Storage Server problems Monitor Red Hat Storage Server workloads Perform Red Hat Storage Server management tasks such as tuning volume options, volume migration, stopping and deleting volumes, and configuring server-side quorum As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Exam candidates should: Be a Red Hat Certified System Administrator (RHCSA) or have comparable work experience and skills. Have taken the Red Hat Gluster Storage Administration (RH236) course or have work experience using Red Hat Gluster Storage. Recommended course RH236 - R ...

Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform these tasks: Install and configure Puppet. Install Puppet servers. Install Puppet nodes. Register Puppet nodes to a Puppet server. Create and maintain Puppet manifests. Create new Puppet manifests. Debug existing Puppet manifests. Create Puppet modules. Create reusable modules. Create modules with classes, name spaces, variables, and conditionals. Create modules that install software on target nodes and deploy configuration files. Use facter to obtain system information. Create custom facts. Use facts to change Puppet behavior. [ - ul * These audiences may be interested in earning the Red Hat Certificate of Expertise in Configuration Management with Puppet: Experienced Linux system administrators responsible for the planning, deployment, and management of multiple physical or virtualized servers Experienced Linux systems administrators responsible for implementing DevOps practices An RHCE interested in earning a Red Hat Certificate of Expertise or Red Hat Certified Architect (RHCA) credential Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform these tasks: Install and configure Puppet. Install Puppet servers. Install Puppet nodes. Register Puppet nodes to a Puppet server. Create and maintain Puppet manifests. Create new Puppet manifests. Debug existing Puppet manifests. Create Puppet modules. Create reusable modules. Create modules with classes, name spaces, variables, and conditionals. Create modules that install software on target nodes and deploy configuration files. Use facter to obtain system information. Create custom facts. Use facts to change Puppet behavior. Create Git repositories. Create and perform simple management of a Git repository. Add files to a Git repository. Apply changes and commit changed files to a Git repository. Implement Puppet in a Red Hat Satellite 6 environment. Create a Puppet repository on Red Hat Satellite. Install, configure, and deploy Puppet modules using Red Hat Satellite. Register Puppet clients to a Red Hat Satellite server. As with all Red Hat performance-based exams, configurations must persist after restart without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as total scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Exam candidates should: Hold a current RHCE certification at exam time Have Red Hat Configuration Management with Puppet (DO405) or equivalent experience Understand that actual system administration experience is also an important aspect of preparation for the exam Review exam objectives for the Red Hat Certificate of Expertise in Configuration Management with Puppet exam Recommende ...