Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind * Experienced Linux system administrators responsible for maximizing resource utilization through performance tuning An RHCE interested in earning Red Hat Certified Architect (RHCA) Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind Configure systems to run SystemTap scripts Alter process priorities of both new and existing processes Configure systems to support alternate page sizes for applications that use large amounts of memory Given multiple versions of applications that perform the same or similar tasks, choose which version of the application to run on a system based on its observed performance characteristics Configure disk subsystems for optimal performance using mechanisms such as swap partition placement, I - O scheduling algorithm selection, file system layout and others Configure kernel behavior by altering module parameters Calculate network buffer sizes based on known quantities such as bandwidth and round-trip time and set system buffer sizes based on those calculations Select and configure tuned profiles Manage system resource usage using control groups As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Red Hat recommends that candidates ea> Red Hat Certified System Administrator (RHCSA) or Red Hat Certified Engineer (RHCE) before attempting this exam but neither is required. Exam candidates should: Be a Red Hat Certified System Administrator (RHCSA) or have comparable work experience and s ...

Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind * Experienced Linux system administrators responsible for maximizing resource utilization through performance tuning An RHCE interested in earning Red Hat Certified Architect (RHCA) Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind Configure systems to run SystemTap scripts Alter process priorities of both new and existing processes Configure systems to support alternate page sizes for applications that use large amounts of memory Given multiple versions of applications that perform the same or similar tasks, choose which version of the application to run on a system based on its observed performance characteristics Configure disk subsystems for optimal performance using mechanisms such as swap partition placement, I - O scheduling algorithm selection, file system layout and others Configure kernel behavior by altering module parameters Calculate network buffer sizes based on known quantities such as bandwidth and round-trip time and set system buffer sizes based on those calculations Select and configure tuned profiles Manage system resource usage using control groups As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Red Hat recommends that candidates ea> Red Hat Certified System Administrator (RHCSA) or Red Hat Certified Engineer (RHCE) before attempting this exam but neither is required. Exam candidates should: Be a Red Hat Certified System Administrator (RHCSA) or have comparable work experience and s ...

Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind C * Experienced Linux system administrators responsible for maximizing resource utilization through performance tuning An RHCE interested in earning Red Hat Certified Architect (RHCA) Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind Configure systems to run SystemTap scripts Alter process priorities of both new and existing processes Configure systems to support alternate page sizes for applications that use large amounts of memory Given multiple versions of applications that perform the same or similar tasks, choose which version of the application to run on a system based on its observed performance characteristics Configure disk subsystems for optimal performance using mechanisms such as swap partition placement, I - O scheduling algorithm selection, file system layout and others Configure kernel behavior by altering module parameters Calculate network buffer sizes based on known quantities such as bandwidth and round-trip time and set system buffer sizes based on those calculations Select and configure tuned profiles Manage system resource usage using control groups As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Red Hat recommends that candidates ea> Red Hat Certified System Administrator (RHCSA) or Red Hat Certified Engineer (RHCE) before attempting this exam but neither is required. Exam candidates should: Be a Red Hat Certified System Administrator (RHCSA) or have comparable work experience and skills (RHCE would be eve ...

...

This course combines CIFS, NFS, and performance analysis topics into a single, in-depth one-week course. It provides the knowledge and skills that you need to administer CIFS version 1.x to 2.x and NFS versions 3, 4, and 4.1 in a clustered Data ONTAP® operating system. You also lea> the skills you need to collect and analyze performance data from NetApp® storage systems. Audience Professionals who manage NetApp storage systems and need a deeper understanding of prot ...

Performance tuning of T-SQL Queries * Tento kurz je určen pro vývojáře a administrátory, kteří potřebují psát své T-SQL dotazy tak, aby byly provedeny co nejrychleji, případně se jen chtějí naučit optimalizační techniky dotazů na straně vývoje aplikací. Účastníci se naučí úspěšně monitorovat T-SQL dotazy a identifikovat náročné operace, pochopit exekuční plány, a správně používat indexy. Získají širší znalosti o tom, co se děje na pozadí, jako například analyzovat, zda je pomalost dotazu způsobe ...

• 19.09.2024 - 20.09.2024 Praha



• 16.01.2025 - 17.01.2025 Brno



• 12.12.2024 - 13.12.2024 Praha



• 24.10.2024 - 25.10.2024 Brno

IT konference kurzy a certifikace Open Source Linux Recenze - Technický workshop - Linux Troubleshooting & tuning Zpět Vojtěch Sova 16. 6. 2023 Instruktor měl viditelné nadšení pro věc a touhu předat své znalosti dál, což vždy ovlivňuje vnímání posluchače. Dozvěděl jsem se o plno nových postupech, především například ...

• 13.09.2024 Praha 7

For those students who are looking for more in-depth knowledge on managing performance on Clustered Data ONTAP after completing DCADM should consider PERFCDOT. This course will teach students to use available tools such as system commands and NetApp OnCommand to collect and monitor performance data. Students will lea> to use this data to identify and implement system changes that improve the efficiency of the system. Hands-on labs, case-studies, and technical discussion ...

Test Stack pro detekci incidentů v infrastruktuře a webových aplikací. Uživatel dnes vyžaduje rychlou, bezpečnou a funkční aplikaci. To je ale podmíněno funkčními dodávkami kódu a správně nastavenou infrastrukturou. Vývojové týmy dodávají expresně nový kód, který se testuje na nižších prostředích a po úspěšné akceptaci se přesouvá na produkci. Stakeholdři mají na aplikaci funkcionální a nefunkcionální požadavky, které akceptujeme pomocí funkcinálních a nefunkcinálních te ...

PostgreSQL - High performance, Backup and Replication * Tento kurz je určen pokročilejším uživatelům a vývojářům, kteří používají PostgreSQL. Zabývá se obecněji otázkou výkonu datově orientovaných aplikací postavených nad relační databází a možnostmi zálohování. V kurzu si rovněž posluchači prakticky vyzkouší konfiguraci vestavěné replikace. ...

• 09.01.2025 - 10.01.2025 Praha



• 03.10.2024 - 04.10.2024 Praha



• 03.10.2024 - 04.10.2024 Brno



• 05.12.2024 - 06.12.2024 Brno

VMware vSphere: optimize and Scale is designed for experienced VMware vSphere® users. It teaches advanced skills for configuring and maintaining a highly available and scalable virtual infrastructure. Through a mix of lecture and hands-on labs, you will configure and optimize the vSphere features that build a foundation for a truly scalable infrastructure and discuss when and where these features have the greatest effect. Anyone who is ready to take their understanding of ...