Study points for the exam RHCE exam candidates should consult the RHCSA exam objectives and be capable of RHCSA-level tasks, as some of these skills may be required in order to meet RHCE exam objectives. Red Hat reserves the right to add, modify, and remove objectives. Such changes will be made public in advance through revisions to this document. RHCE exam candidates should be able to accomplish the following without assistance. These have been grouped into several categories. System configuration and management Use network teaming or bonding to configure aggregated network links between two Red Hat Enterprise Linux systems Configure IPv6 addresses and perform basic IPv6 troubleshooting Route IP traffic and create static routes Use firewalld and associated mechanisms such as rich rules, zones and custom rules, to implement packet filtering and configure network address translation (NAT) Use - proc - sys and sysctl to modify and set kernel runtime para * Experienced Linux IT professionals who currently have RHCSA certification and are interested in earning an RHCE certification Experienced Red Hat Enterprise Linux system administrators seeking validation of their skills Students who have attended the Red Hat System Administration I, II, and III courses or the RHCE Certification lab Experienced Linux system administrators who require a certification either by their organization or based on a mandate (DOD 8570 directive) An RHCE who is noncurrent and has passed the RHCSA exam Study points for the exam RHCE exam candidates should consult the RHCSA exam objectives and be capable of RHCSA-level tasks, as some of these skills may be required in order to meet RHCE exam objectives. Red Hat reserves the right to add, modify, and remove objectives. Such changes will be made public in advance through revisions to this document. RHCE exam candidates should be able to accomplish the following without assistance. These have been grouped into several categories. System configuration and management Use network teaming or bonding to configure aggregated network links between two Red Hat Enterprise Linux systems Configure IPv6 addresses and perform basic IPv6 troubleshooting Route IP traffic and create static routes Use firewalld and associated mechanisms such as rich rules, zones and custom rules, to implement packet filtering and configure network address translation (NAT) Use - proc - sys and sysctl to modify and set kernel runtime parameters Configure a system to authenticate using Kerberos Configure a system as either an iSCSI target or initiator that persistently mounts an iSCSI target Produce and deliver reports on system utilization (processor, memory, disk, and network) Use shell scripting to automate system maintenance tasks Network services Network services are an important subset of the exam objectives. RHCE candidates should be capable of meeting the following objectives for each of the network services listed below: Install the packages needed to provide the service Configure SELinux to support the service Use SELinux port labeling to allow services to use non-standard ports Configure the service to start when the system is booted Configure the service for basic operation Configure host-based and user-based security for the service HTTP - HTTPS Configure a virtual host Configure private directories Deploy a basic CGI application Configure group-managed content Configure TLS security DNS Configure a caching-only name server Troubleshoot DNS client issues NFS Provide network shares to specific clients Provide network shares suitable for group collaboration Use Kerberos to control access to NFS network shares SMB Provid ...

Umíte česky? Každý z nás Čechů, Moravanů a Slezanů samozřejmě odpoví, že ano. A možná by stejně odpověděl na otázku, zda umí dobře česky. Proč tedy dostáváme tolik dopisů a materiálů s pravopisnými chybami a stylisticky upravených tak, že dlouhou přemýšlíme, co po nás někdo chce a proč tento dopis vlastně poslal. Je nesporné, že v době počítačů, mobilních telefonů a sms zpráv znatelně klesá úroveň znalostí českého jazyka. To se projevuje jak v ústním, tak i písemném projevu. Co Vám přinese náš program? Připomene Vám zajímavou a atraktivní formou nejdůležitější principy mateřského jazyka. Ale to zdaleka není vše. Dozvíte se, jak správně formulovat pracovní i osobní dopisy a speciální kapitolou je dnes tolik oblíbená mailová korespondence, s celou řadou zvláštností. Vyzkoušejte si ho sami. ...

This one-and-a-half-day course, Application Setup in Microsoft Dynamics NAV 2009, provides students with the tools to implement and maintain cross-application setup data after the system components are installed. The focus is on the application-oriented work involved in setting up and maintaining company-wide rules, data, and users. * Module 1: Set Up a Company with the RIM Toolkit This module provides individuals in charge of application setup, such as implementation consultants or customer staff, with the tools to set up a new company using the RIM toolkit, in addition to creating new records based on RIM data templates. Lessons Manual Setup vs. RIM, RIM Toolkit Overview, Using the RIM Toolkit, Demonstration: Create a Setup Questionnaire, Demonstration: Initialize a New Company Based on the Setup Questionnaire, Use Data Templates, Migrate Data Module 2: Set Up Number Series This module explains the purpose of number series and how to manually set them up, including how to define number series relationships to use multiple number series on a single number series. Lessons Number Series Module 3: Set Up Journal Templates and Batches This module provides an overview of journal templates and journal batches to explain their purpose and composition. This module also explains how to set up a journal template and demonstrates how to create two journal batches based on one journal template. Lessons Journal Templates, Batches, and Lines, Create Journal Templates and Batches Module 4: Set Up Posting Groups In this module, the three types of posting groups are described and set up, and then the functions of a posting group structure are demonstrated using a posted sales invoice. Lessons Specific Posting Groups, General Posting Groups, General Posting Setup, VAT Posting Groups, VAT Posting Setup, Additional VAT Posting Setup, Procedure: Determine Posting Groups, Demonstration: Post and Review a Sales Transaction Module 5: Set Up Dimensions In this module, all aspects of dimensions are defined and set up, including Dimension Values, Dimension Combinations, Default Dimensions, and Default Dimension Priority. Lessons Dimensions and Dimensions Values, Dimension Types, Dimension Combinations, Default Dimensions, Default Dimension Priority, Demonstration: Work with Default Dimension Priorities Module 6: Manage User Rights and Profiles This module explains the concepts of logins, roles, and permissions, which are critical to managing user rights in Microsoft Dynamics NAV. The module demonstrates central administrator tasks and offers recommendations about how to most effectively secure data in the system with logins for both the RoleTailored client and Classic client. This module also explains how to set up and assign users to profiles for use in the RoleTailored client. Lessons Authentication, Security Setup Overview, Security Sectup for RoleTailored Client, User Profile Setup for the RoleTaloired Client, Demonstration: Create a New Role, Demonstration: Apply SQL Server Security Filters, Security Setup for Classic Client, User-Specific Setup, Active Directory Security Module 7: Set Up and Manage Document Approvals This module is an introduction to process of setting up and managing the document approval system. It covers the general ...

Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Install Red Hat Storage Server on both physical and virtual systems and work with existing Red Hat Storage Server appliances Configure a Red Hat Storage Server storage pool Create individual storage bricks on either physical devices or logical volumes Create various Red Hat Storage Server volumes such as: Distributed Replicated Distributed-replicated Stripe-replicated Distributed-striped Distributed-striped-replicated • Format the volumes with an appropriate file system Create Red Hat Storage Server volume snapshots Extend existing storage volumes by adding additional bricks and performing appropriate rebalancing operations * The following audiences may be interested in earning the Red Hat Certificate of Expertise in Hybrid Cloud Storage: System administrators, architects, and others who need to demonstrate their skills, knowledge, and ability in using Red Hat Storage Server RHCEs interested in pursuing Red Hat Certified Architect (RHCA) Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Install Red Hat Storage Server on both physical and virtual systems and work with existing Red Hat Storage Server appliances Configure a Red Hat Storage Server storage pool Create individual storage bricks on either physical devices or logical volumes Create various Red Hat Storage Server volumes such as: Distributed Replicated Distributed-replicated Stripe-replicated Distributed-striped Distributed-striped-replicated • Format the volumes with an appropriate file system Create Red Hat Storage Server volume snapshots Extend existing storage volumes by adding additional bricks and performing appropriate rebalancing operations Configure clients to use Red Hat Storage Server appliance volumes using native and network file systems (NFS) Configure clients to use Red Hat Storage Server appliance volumes using SMB Configure Red Hat Storage Server features including disk quotas and POSIX access control lists (ACLs) Configure IP failover for NFS-and SMB-based cluster services Configure geo-replication services Configure unified object storage Configure Red Hat Storage Server to support Hadoop Troubleshoot Red Hat Storage Server problems Monitor Red Hat Storage Server workloads Perform Red Hat Storage Server management tasks such as tuning volume options, volume migration, stopping and deleting volumes, and configuring server-side quorum As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Exam candidates should: Be a Red Hat Certified System Administrator (RHCSA) or have comparable work experience and skills. Have taken the Red Hat Gluster Storage Administration (RH236) course or have work experience using Red Hat Gluster Storage. Recommended course RH236 - R ...

Study points for the exam To help you prepare, review the exam objectives which highlights the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates for the Red Hat Certificate of Expertise in Server Hardening should be able to perform the following tasks: Identify Red Hat Common Vulnerabilities and Exposures (CVEs) and Red Hat Security Advisories (RHSAs) and selectively update systems based on this information Verify package security and validity Identify and employ standards-based practices for configuring file system security, create and use encrypted file systems, tune file system features, and use specific mount options to restrict access to file system volumes Configure default permissions for users and use special file permissions, attributes, and access control lists (ACLs) to control access to files Install a * The following audiences may be interested in earning the Red Hat Certificate of Expertise in Server Hardening: System administrators responsible for standards-compliant security on Red Hat Enterprise Linux systems System administrators responsible for security on Red Hat Enterprise Linux systems or who wish to harden systems beyond default configurations RHCEs who wish to ea> Red Hat Certified Architect (RHCA). Study points for the exam To help you prepare, review the exam objectives which highlights the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates for the Red Hat Certificate of Expertise in Server Hardening should be able to perform the following tasks: Identify Red Hat Common Vulnerabilities and Exposures (CVEs) and Red Hat Security Advisories (RHSAs) and selectively update systems based on this information Verify package security and validity Identify and employ standards-based practices for configuring file system security, create and use encrypted file systems, tune file system features, and use specific mount options to restrict access to file system volumes Configure default permissions for users and use special file permissions, attributes, and access control lists (ACLs) to control access to files Install and use intrusion detection capabilities in Red Hat Enterprise Linux to monitor critical system files Manage user account security and user password security Manage system login security using pluggable authentication modules (PAM) Configure console security by disabling features that allow systems to be rebooted or powered off using bootloader passwords Configure system-wide acceptable use notifications Install, configure, and manage identity management services and configure identity management clients Configure remote system logging services, configure system logging, and manage system log files using mechanisms such as log rotation and compression Configure system auditing services and review audit reports Use network scanning tools to identify open network service ports and configure and troubleshoot system firewalling As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Be a Red Hat Certified System Administrator (RHCSA) or have comparable wor ...

Study points for the exam Using Red Hat JBoss Enterprise Application Platform and Red Hat JBoss Developer Studio, you should be able to accomplish the tasks below without assistance. The tasks have been grouped into categories to assist your preparation. Configure and create enterprise-ready web projects Configure database connection and persistence details Include existing components and entities Generate views and view beans from entities Choose between war and ear applications Generate the application scaffold Handle web and enterprise application project structures, including possible configuration file locations Generate and deploy the application using maven or JBoss Tools Work with contexts (CDI) Use the best context lifecycle for a given use case Make good use of Conversation by understanding: Context order used by the container to resolve components and contex * Java™ EE application developers Study points for the exam Using Red Hat JBoss Enterprise Application Platform and Red Hat JBoss Developer Studio, you should be able to accomplish the tasks below without assistance. The tasks have been grouped into categories to assist your preparation. Configure and create enterprise-ready web projects Configure database connection and persistence details Include existing components and entities Generate views and view beans from entities Choose between war and ear applications Generate the application scaffold Handle web and enterprise application project structures, including possible configuration file locations Generate and deploy the application using maven or JBoss Tools Work with contexts (CDI) Use the best context lifecycle for a given use case Make good use of Conversation by understanding: Context order used by the container to resolve components and context variables Temporary versus long running Conversation promotion Conversation demarcation and propagation Relation between conversations, transactions, and persistence context flushmode Debugging a CDI application (potentially with Arquillian) Manage context content Work with POJO - JEE components Differences between EJB3-based components and POJO-based components Component definition Apply @Named Configure beans.xml Component lifecycle Component - contexts interaction Use of @Inject Understand interceptors Understand events Use @Alternative Use @Decorator Apply qualifier Apply producer Apply dispose Setting component and context variable in particular context using CDI APIs Implement the observer or observed patte> using CDI Implement a transactional conversation having in mind the relation between conversations, transactions, and persistence context flushmode JAAS security-related features, including (list not exhaustive) authentication restriction security events bind authentication methods Access and manage identity information through API Work with web - JSF components and web navigation Understand Postback lifecycle Use exhaustive navigation capabilities using faces-config Handling of RESTFul approach with JSF2 (viewparam) Use common Richfaces components Configure navigation based on application state Set up JSF input validation Set up JSF input conversion Use Expression Language (EL) Understand message bundle and locales Choose and configure JSF components Efficiently handle exceptions Implement success and error messages ...

Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates for the Red Hat Certificate of Expertise in Camel Development should be able to: Create and maintain Camel routes Use the Java ™ language Use the CamelContext XML Exchange messages Body In - out Headers Attachments Consume and produce files CSV format XML format Work with databases and the Camel JPA component Understand transactional routes Use EIPs Content-based routing Wire Tap Splitter Aggregator RecipientList Use Camel components File2 FTP JPA2 JMS Direct Use Camel Test Mock endpoints JUnit 4 integration and CamelTest * The following audiences may be interested in earning the Red Hat Certificate of Expertise in Camel Development: Enterprise Java developers who are familiar with service-oriented architecture (SOA) principles and are responsible for integrating enterprise applications. Enterprise SOA architects with some Java development experience and knowledge of enterprise integration. Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates for the Red Hat Certificate of Expertise in Camel Development should be able to: Create and maintain Camel routes Use the Java ™ language Use the CamelContext XML Exchange messages Body In - out Headers Attachments Consume and produce files CSV format XML format Work with databases and the Camel JPA component Understand transactional routes Use EIPs Content-based routing Wire Tap Splitter Aggregator RecipientList Use Camel components File2 FTP JPA2 JMS Direct Use Camel Test Mock endpoints JUnit 4 integration and CamelTest APIs Dynamically route messages Use conditional routes Use data-driven routes Handle exceptions Catch and handle exceptions Use the dead-letter queue Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Red Hat recommends that candidates for this exam ea> EX225 - Red Hat Certified JBoss Developer (RHCJD) before attempting this exam, but it is not required. Exam candidates should: Have taken the Camel Development with Red Hat JBoss Fuse (AD421) course or have extensive work experience in enterprise integration using Apache Camel Have familiarity working in a Red Hat Enterprise Linux ® environment Review the Red Hat Certificate of Expertise in Camel Development exam (EX421) objectives Recommended courses AD421 - Camel Development with Red Hat JBoss Fuse ...

Study points for the exam To help you prepare, review the exam objectives which highlights the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. This course is a combination of Authoring Rules with Red Hat JBoss BRMS (AD461) and Developing with Red Hat JBoss BRMS (AD463) Candidates should be able to perform the tasks listed below: Designing Business Rules Creating and using an intermediate drools model with associated facts Organizing rules and managing facts Understanding and using effective rule design patterns Authoring Basic rulesCalendars Decision tables Rule templates DSL Conflict Resolution Prioritizing and ordering rule execution Grouping rules Using rule flow groups Session Management Building common object Stateless kie session St * Experienced enterprise Java developers who are familiar with service-oriented architecture (SOA) principles and JBoss ESB Enterprise SOA architects with some Java development experience and knowledge of JBoss ESB Study points for the exam To help you prepare, review the exam objectives which highlights the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. This course is a combination of Authoring Rules with Red Hat JBoss BRMS (AD461) and Developing with Red Hat JBoss BRMS (AD463) Candidates should be able to perform the tasks listed below: Designing Business Rules Creating and using an intermediate drools model with associated facts Organizing rules and managing facts Understanding and using effective rule design patterns Authoring Basic rulesCalendars Decision tables Rule templates DSL Conflict Resolution Prioritizing and ordering rule execution Grouping rules Using rule flow groups Session Management Building common object Stateless kie session Stateful kie session Adding, removing and updating facts Testing and Maintenance Creating effective test scenarios Identifying potential issues including poorly designed rules Performance Understanding the impacts of different rule designs and implementations Identifying and avoiding common, inefficient results such as cartesian products Administration Deploying and managing rules Creating and using snapshots Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites There are no prerequisites to take this exam but it is recommended that an individual take Implementing Red Hat JBoss BRMS (AD465) . Recommended courses AD465 - Implementing Red Hat JBoss BRMS ...

Předpokládané znalosti Uživatelská znalost práce s PC a základy geometrie. Cíl kurzu Naučit se vytvářet dokonalé digitální prototypy v jednoduchém pracovním prostředí založeném na web-cloud technologii. Zaměření kurzu Kurz je vhodný pro začátečníky nebo samouky v aplikaci Autodesk Fusion, je určen pro hobby, jednotlivce nebo malé firmy, ale funkčním rozsahem je i zajímavým řešením pro větší konstrukčn ...

• 03.03.2025 - 04.03.2025 Praha



• 10.06.2025 - 11.06.2025 Praha



• 15.01.2025 - 16.01.2025 Praha



• 24.02.2025 - 25.02.2025 Brno



• 26.05.2025 - 27.05.2025 Brno

Tento navazující pětidenní kurz je určen pro pokročilejší správce Windows 10, kteří se chtějí seznámit s podrobnostmi centrálního nasazení a správy stanic a virtuálních stanic pomocí Group Policy a cloud technologie Windows Intune v podnikovém prostředí. Cílová skupina Kurz je určen správcům koncových stanic, kteří se chtějí specializovat na správu operačních systémů Windows 10. ...