Pořádáte podobné kurzy, školení a/nebo studium. Vložte Vaše kurzy na web. Kurs / kurzy nemusí být rekvalifikační,
stačí když kurzy budou mít termín konání školení pro on-line objednávku kurzu
Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as Performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind * Experienced Linux system administrators responsible for maximizing resource utilization through performance tuning An RHCE interested in earning Red Hat Certified Architect (RHCA) Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as Performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind Configure systems to run SystemTap scripts Alter process priorities of both new and existing processes Configure systems to support alternate page sizes for applications that use large amounts of memory Given multiple versions of applications that perform the same or similar tasks, choose which version of the application to run on a system based on its observed performance characteristics Configure disk subsystems for optimal performance using mechanisms such as swap partition placement, I - O scheduling algorithm selection, file system layout and others Configure kernel behavior by altering module parameters Calculate network buffer sizes based on known quantities such as bandwidth and round-trip time and set system buffer sizes based on those calculations Select and configure tuned profiles Manage system resource usage using control groups As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Red Hat recommends that candidates ea> Red Hat Certified System Administrator (RHCSA) or Red Hat Certified Engineer (RHCE) before attempting this exam but neither is required. Exam candidates should: Be a Red Hat Certified System Administrator (RHCSA) or have comparable work experience and s ...
Cena kurzu: ...
500 EUR / Kurz
... včetně DPH: 605 EUR / Kurz
Objednat - pro přihlášení na kurz/školení klikněte na zvolený termín školení a místo konání
Popis kurzu EX442 – Red Hat Certificate of Expertise in Performance Tuning exam
Kurz je určen pro ...
Audience
Experienced Linux system administrators responsible for maximizing resource utilization through performance tuning
An RHCE interested in earning Red Hat Certified Architect (RHCA)
Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below:
Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior
Configure systems to provide performance metrics using utilities such as Performance Co-Pilot (PCP)
Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources
Use /proc/sys, sysctl and /sys to examine and modify and set kernel run-time parameters
Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations
Analyze system and application behavior using tools such as ps, strace, top and Valgrind
Configure systems to run SystemTap scripts
Alter process priorities of both new and existing processes
Configure systems to support alternate page sizes for applications that use large amounts of memory
Given multiple versions of applications that perform the same or similar tasks, choose which version of the application to run on a system based on its observed performance characteristics
Configure disk subsystems for optimal performance using mechanisms such as swap partition placement, I/O scheduling algorithm selection, file system layout and others
Configure kernel behavior by altering module parameters
Calculate network buffer sizes based on known quantities such as bandwidth and ro
Lektoři kurzu
Lektoři z firmy: DataScript s.r.o.
[Kurz] Program kurzu (obsah přednášky/semináře/rekvalifikace/studia) ...
Experienced Linux system administrators responsible for maximizing resource utilization through performance tuning
An RHCE interested in earning Red Hat Certified Architect (RHCA)
Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below:
Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior
Configure systems to provide performance metrics using utilities such as Performance Co-Pilot (PCP)
Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources
Use /proc/sys, sysctl and /sys to examine and modify and set kernel run-time parameters
Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations
Analyze system and application behavior using tools such as ps, strace, top and Valgrind
Configure systems to run SystemTap scripts
Alter process priorities of both new and existing processes
Configure systems to support alternate page sizes for applications that use large amounts of memory
Given multiple versions of applications that perform the same or similar tasks, choose which version of the application to run on a system based on its observed performance characteristics
Configure disk subsystems for optimal performance using mechanisms such as swap partition placement, I/O scheduling algorithm selection, file system layout and others
Configure kernel behavior by altering module parameters
Calculate network buffer sizes based on known quantities such as bandwidth and round-trip time and set system buffer sizes based on those calculations
Select and configure tuned profiles
Manage system resource usage using control groups
As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Red Hat recommends that candidates ea> Red Hat Certified System Administrator (RHCSA) or Red Hat Certified Engineer (RHCE) before attempting this exam but neither is required. Exam candidates should:
Be a Red Hat Certified System Administrator (RHCSA) or have comparable work experience and skills (RHCE would be even better).
Have taken the Red Hat Enterprise System Monitoring and Performance Tuning (RH442) course or have extensive work experience in performance tuning.
Review the Red Hat Certificate of Expertise in Performance Tuning exam (EX442) objectives.
Recommended courses RH442 – Red Hat Enterprise Performance Tuning
[Kurz] Obsah kurzu/školení...
Experienced Linux system administrators responsible for maximizing resource utilization through performance tuning
An RHCE interested in earning Red Hat Certified Architect (RHCA)
Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below:
Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior
Configure systems to provide performance metrics using utilities such as Performance Co-Pilot (PCP)
Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources
Use /proc/sys, sysctl and /sys to examine and modify and set kernel run-time parameters
Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations
Analyze system and application behavior using tools such as ps, strace, top and Valgrind
Configure systems to run SystemTap scripts
Alter process priorities of both new and existing processes
Configure systems to support alternate page sizes for applications that use large amounts of memory
Given multiple versions of applications that perform the same or similar tasks, choose which version of the application to run on a system based on its observed performance characteristics
Configure disk subsystems for optimal performance using mechanisms such as swap partition placement, I/O scheduling algorithm selection, file system layout and others
Configure kernel behavior by altering module parameters
Calculate network buffer sizes based on known quantities such as bandwidth and round-trip time and set system buffer sizes based on those calculations
Select and configure tuned profiles
Manage system resource usage using control groups
As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Red Hat recommends that candidates ea> Red Hat Certified System Administrator (RHCSA) or Red Hat Certified Engineer (RHCE) before attempting this exam but neither is required. Exam candidates should:
Be a Red Hat Certified System Administrator (RHCSA) or have comparable work experience and skills (RHCE would be even better).
Have taken the Red Hat Enterprise System Monitoring and Performance Tuning (RH442) course or have extensive work experience in performance tuning.
Review the Red Hat Certificate of Expertise in Performance Tuning exam (EX442) objectives.
Recommended courses RH442 – Red Hat Enterprise Performance Tuning
[Kurz] Cíl školení / poznámka ke kurzu...
Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below:
Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior
Configure systems to provide performance metrics using utilities such as Performance Co-Pilot (PCP)
Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources
Use /proc/sys, sysctl and /sys to examine and modify and set kernel run-time parameters
Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations
Analyze system and application behavior using tools such as ps, strace, top and Valgrind
Configure systems to run SystemTap scripts
Alter process priorities of both new and existing processes
Configure systems to support alternate page sizes for applications that use large amounts of memory
Given multiple versions of applications that perform the same or similar tasks, choose which version of the application to run on a system based on its observed performance characteristics
Configure disk subsystems for optimal performance using mechanisms such as swap partition placement, I/O scheduling algorithm selection, file system layout and others
Configure kernel behavior by altering module parameters
Calculate network buffer sizes based on known quantities such as bandwidth and round-trip time and set system buffer sizes based on those calculations
Select and configure tuned profiles
Manage system resource usage using control groups
As with all Red Hat performance-based exams, configurations must persist after reboot without intervention.
[Školení] Další popis kurzu (úroveň, minimální znalosti, informace o cenách kurzu) ...
Prerequisites Red Hat recommends that candidates ea> Red Hat Certified System Administrator (RHCSA) or Red Hat Certified Engineer (RHCE) before attempting this exam but neither is required. Exam candidates should:
Be a Red Hat Certified System Administrator (RHCSA) or have comparable work experience and skills (RHCE would be even better).
Have taken the Red Hat Enterprise System Monitoring and Performance Tuning (RH442) course or have extensive work experience in performance tuning.
Review the Red Hat Certificate of Expertise in Performance Tuning exam (EX442) objectives.
Recommended courses RH442 – Red Hat Enterprise Performance Tuning
[dotaz na školení/kurz] Formulář pro komentáře, dotazy a odpovědi
::
DataScript je autorizovaným poskytovatelem IT kurzů a certifikací. V našich školících prostorách poskytujeme řadu vysoce odborných a respektovaných IT kurzů, specializovaných technologických školení i certifikací IT specialistů, systémových administrátorů a techniků. V nabídce naší činnosti nechybí ani speciální tréninky určené ke zvýšení profesionálních dovedností a schopností odborných pracovníků. DataScript klade důraz nejen na dokonalou teoretickou přípravu a odborné znalosti, ale rovněž na jejich praktické využití a řešení konkrétních situací. DataScript je součástí koncernu Servodata. Společnost Servodata je významným Value Added Distributorem komponent a infrastruktury podnikových ICT řešení. Dlouhodobě se specializuje na distribuci ...
Platební podmínky pro účast na kurzu
Objednavateli bude zaslána závazná přihláška k podpisu. Poté bude účastník na školení registrován. Objednavatel uhradí částku kurzovného za výše uvedeného posluchače na základě faktury vystavené poskytovatelem.
Jiný kurz v jiné ceně : IT konference Kurzy a certifikace Open Source Linux Recenze - Technický workshop - Linux Troubleshooting & Tuning Zpět Vojtěch Sova 16. 6.
Jiný kurz v jiné ceně : Performance Tuning of T-SQL Queries * Tento kurz je určen pro vývojáře a administrátory, kteří potřebují psát své T-SQL dotazy tak, aby byly provedeny co nejrychleji, případně se jen chtějí naučit optimalizační techniky dotazů na straně vývoje aplikací. Účastníci se naučí
Jiný kurz v jiné ceně : PostgreSQL - High Performance, Backup and Replication * Tento kurz je určen pokročilejším uživatelům a vývojářům, kteří používají PostgreSQL. Zabývá se obecněji otázkou výkonu datově orientovaných aplikací postavených nad relační databází a možnostmi zálohování.
[RSS] Nechte si posílat nové termíny kurzuChcete vědět kdy bude další termín kurzu? - Využijte RSS a nechte si posílat každé změny a/nebo nové termíny kurzu do Vaší čtečky RSS (bez registrace)
Objednavateli bude zaslána závazná přihláška k podpisu. Poté bude účastník na školení registrován. Objednavatel uhradí částku kurzovného za výše uvedeného posluchače na základě faktury vystavené poskytovatelem.
= Podobný kurz nebo školení
Počítačové sítě
